Download Attachment
-
Specification
S5500E-24G-V3TF4.pdf
- File Name Extension :
- File Size :
- 201KB
Manged L3 fiber switch
24*10/100/1000M RJ45 ports + 4*10G SFP+ ports
598G Switching Capacity in Gigabits per Second (Gbps)
| S5500E-24F-V3TF4G4 | |
| Interface | 24*100/1000M SFP ports |
| 4*10/100/1000M RJ45 ports | |
| 4*1/10G(SFP+)Ports 1*Console Port (115200,N,8,1) | |
| Network Managed Tape | L3 |
| Network Protocol | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-LX/SX/CX; IEEE802.3ae 10GBase-SR/LR; IEEE802.3x |
| Ethernet Port Feature | Support full/half duplex MDI/MDI-X self-adaption |
| SFP Port Characteristic | Gigabit /10 Gigabit SFP optical fiber interface, default matching optical , modules, need to buy separately, (optional single-mode/multi-mode, single fiber / dual fiber module, LC) |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 598Gbps |
| Forwarding Rate@64byte | 131Mpps |
| MAC Address Table | 32K |
| Buffer Memory | 32M |
| Twisted Pair Transmission | 10BASE-T : Cat3,4,5 UTP(≤100 meter) |
| 100BASE-TX : Cat5e or later UTP(≤100 meter) 1000BASE-T : Cat6 or later UTP(≤100 meter) |
|
| Optical cable | Multi-mode
:850nm 0˜300M(10G) , Single-mode:1310nm 0˜40KM , 1550nm 0˜120KM |
| Total PWR / Input Voltage | 60W/(AC100-240V) |
| Power Consumption | standby:<20W;full load:<40W |
| LED | Power indicator: PWR (yellow),System indicator: SYS(yellow),Network indicator: Link/Act (yellow), Fiber port :L/A(green) |
| Reset switch | Support one key to restore factory settings |
| Power Supply | Built-in power supply : AC:100˜240V 50-60Hz 1A |
| Operation TEMP / Humidity | -20˜+55°C;5%˜90% RH Non condensing |
| Storage TEMP / Humidity | -40˜+80°C;5%˜95% RH Non condensing |
| Dimension | 440*225*44mm |
| Net /Gross Weight | <2.2kg / <3.2kg |
| Installation Method | Desktop tape. 19 inch 1U cabinet installation |
| Lightning protection / protection level | Port Lightning Protection 4KV 8/20us; Protection Level: IP30 |
| Certification | 3C,CE mark commercial,CE/LVD EN60950,FCC Part 15 Class B, RoHS |
| Warranty | Ethernet switch 1 year, lifetime maintenance |
| Interface | IEEE802.3x flow control (full duplex) |
| Broadcast storm suppression for port rate | |
| support speed limit for incoming and offline message traffic, with a minimum particle size of 64Kbps. | |
| Temperature protection setting | |
| Energy saving configuration of port EEE Ethernet | |
| Layer3 Function | L3 network management function, |
| IPV4/IPV6 management support layer3 of software line speed forwarding. | |
| Support different network segments, communication between different VLAN | |
| Static routing/default routing,128 maximum entries ARP protocol, 1024 maximum entries | |
| VLAN | Support port based VLAN (4K), IEEE802.1q Support protocol based VLAN |
| Support Access, Trunk, Hybrid three types of port configuration Support QinQ configuration | |
| Port Aggregation | Support LACP |
| Support static polymerization | |
| Support the largest 8 aggregation groups, each aggregation group supports 8 ports. | |
| Spanning Tree | STP(IEEE802.1d) |
| RSTP(IEEE802.1w) MSTP(IEEE802.1s) |
|
| Industrial Ring Network Protocol | Support G.8032 (ERPS), support 255 loops at most, and supports 1024 devices per ring. |
| The self healing time of the ring network is less than 20ms | |
| Multicast | Support IGMP Snooping V1/V2 and support 1024 multicast groups at most. |
| Support the user's quick departure mechanism Support MLD Snooping V1/V2 | |
| Support multicast VLAN | |
| Port Mirroring | Bi-directional traffic mirroring supporting the basic port |
| QoS | Diff-Serv QoS |
| Each port supports 8 output queues Support 802.1p/DSCP priority mapping | |
| Support queue scheduling mechanism (SP, WRR, | |
| SP+WRR) priority tag Mark/Remark | |
| stream based packet filtering Support for stream based redirection Support flow based speed limit | |
| ACL | Support L2 to L4 packet filtering function, can match the first 80 bytes of the |
| message, provide based on the source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN and other definition ACL. | |
| Support ACL based on port and VLAN | |
| Safety Characteristics | Support user grading management and password protection |
| Support IEEE802.1X authentication / centralized MAC address authentication Support AAA&RADIUS authentication | |
| Support the number of MAC address learning restrictions Support MAC address black hole Support SSH 2 to provide secure passwords for user login. Support SSL to ensure data transmission security | |
| Support port isolation | |
| Support the speed limit function of ARP message Support IP source address protection | |
| Support ARP intrusion detection function Support against DoS attacks | |
| Support port broadcast message suppression Support host data backup mechanism Binding capabilities of IP+MAC+VLAN+ ports | |
| DHCP | DHCP Client, DHCP Snooping |
| System Requirements | Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or |
| higher, Microsoft Internet Explorer10 or later; 5 types and above Ethernet cable; | |
| TCP/ IP, network adapter and network operating system (such as Microsoft Windows, Linux or Mac OS X) are installed on computers in the network. |
|
| Description | L3 managed Ethernet switch with 24*100/1000M SFP
ports +4*10/100/1000M RJ45 ports +4*1/10G(SFP+) Ports, Total power is 60W.Built-in power supply |
